Best 433 Mhz Transmitter And Receiver in 2022 [*Top Picks*]
Looking for the best 433 mhz transmitter and receiver on the market? We’ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.
2930 Reviews Scanned
HiLetgo 5 Sets 433M Transmitter + Receiver Kit High Frequency Super Regenerative Transceiver Module for Burglar Alarm
Easy to use, nice range (using antenna on both), you can send strings (text) from one point to another. If you want to automate your house without pulling cables then this device will help you well
Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that operate in the same frequency (433Mhz in this case)
They work in pairs, meaning you need both a receiver and a transmitter to comunicate with each other
Compatible with SparkFun’s 434MHz RF transmitter and RF receiver
This Radio Transmitter & Receiver pair is perfectly matched to allow you to control items from a distance up to 500 feet wirelessly!
DAOKI 5 Set 433MHz RF Transmitter and Receiver Wireless Module Kit High Frequency Remote Control for Arduino with 433MHz Antenna
Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor, the length of the antenna 433M of about 17cm;
Note:Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source; frequency used to receive, decode and oscillation resistor should match with the transmitter.
Widely use for remote control rolling gates, remote control MP3, remote control LED, remote control audio, smart car, smart home, etc.
Package Content:5 x 433Mhz RF Wireless Transmitter Module and Receiver, 10 x 433MHZ Antenna
kwmobile 433 MHz Transmitter and Receiver Module Kit for Remote Control Raspberry Pi Arduino Pack of 3
UNIVERSAL: The kwmobile 433 MHz wireless module is usable for a variety of wireless remote control mechanisms; GPS, and other projects. Furthermore you can use it with a external antenna (not included).
EXAMPLE OF USE: This module is versatile - e.g. wireless outlets, alarm systems, lights and else. Let your creativity run free.
PLEASE NOTE: To enlarge the reception range, you should solder or plug a copper wire to the XY-FST of the ANT contact point.
COMPATIBILITY: Compatible with Raspberry Pi and Arduino devices.
TECHNICAL SPECIFICATIONS: Transmitter: MX-FS-03V / Receiver: MX-05V; Range: 20 - 200m; Operating mode: AM / Sensitivity: -105dB
Dorhea 2Set 433Mhz RF Transmitter and Receiver Module Wireless 4 Channel Output Link Kit Remote Control for Remote Control Switch, Motorcycles, Sutomobile Anti-Theft Products, Home Security Products
Receiver module, working voltage: DC2.5V-5V, working current:3MA, working mode: point move, self-locking, interlocking, the output: 4 channel CMOS level signal corresponding to the remote control ABCD 4 buttons.
Transmitter module, transmitting power: 11dbm, distance: 20-100, emission current: 10MA, customizable special code: MCU type.
Antenna for 433Mhz RF module, short antenna for transmitter module, long antenna for receive module.
Application environment: Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains.
Button usage (sets mode and starts pairing process): Press once: Inching mode (Momentary Mode) Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels) Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active).
QIACHIP 3 Sets of 433mhz RF Transmitter and Receiver Module Wireless 4 Channel Output Link Kit Set with 1527 Learning Code for Remote Control
Multiple working modes : Momentary Mode, Toggle Mode, Latched mode
Application environment: Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, remote control socket, remote control LED, garage door remote control, remote control door opener, remote control curtains, alarm host, remote control MP3.
Wide voltage input (transmitter) ：DC 3V-24V
Gowoops SX1278 LoRa Radio Wireless 433Mhz UART Serial Module LoRaWAN Transmitter Receiver + 433Mhz 3dBi SMA Antenna, Compatible with Arduino STM32 51 Single Chip Microcomputer
✔ LoRa spread-spectrum communication, super anti-interference performance -- The module adopts LORA spread spectrum technology, transmitting distance and anti-interference performance are one time more than FSK
✔ WOR (Low Power Consumption) -- Work on radio, applicable for battery powered applications
✔ FEC (Forward Error Correction) -- High coding efficiency & good correction performance
✔ Transparent Transmission (Point to Point) -- Data sending is via transparent transmission, the module comes with address
✔ Fixed Transmission -- Each module can connect with other module in different addresses and channels to achieve application like networking, repeating, etc.
12V Remote Control Switch 40A Power Switch Radio Controller, Wireless RF Receiver Switch 3000W 433Mhz Remote 2 Transmitter and Receiver,Wide Voltage DC12V - 48V
.The wide voltage single-channel controller is a friendly, idealized practical wireless control device. Working Voltage: DC12V-DC48V; Working Frequency: 433Mhz; Max Load Current:40A Relay (have better Load less than 30A)
【Easy to Use】.We have made transmitter and receiver working together and test it before ship it,when you get it don't need to do anything ,just install it. It has the advantages of convenient installation, simple and safe use.
【Learning functions】.Learning functions and single-chip decoding make it easy for customers to use a variety of remote controls. The free setting of the three working modes is convenient for the user to use different control functions, the input voltage range is wide, the output is charged and the output switching signal is more convenient for the user to use in different occasions, which increases the application flexibility of the product.
【Application】. wide range of applications from simple domestic remote control to autonomous control, It can be applied to the field of lighting, motor, security industry machine, wireless remote control lights and so on
【SIGNAL Stability】.This product uses high-frequency technology with long range and stable signal. Independent control can be achieved without mutual interference. You could turn on / off the receiver with transmitter (remote) from any location within a reliable distance. The wireless radio signals can pass through walls, floors and doors
Wireless Remote Control Switch DC 6V-36V Mini RF Relay Switch Mos Receiver No Sound with 433Mhz Momentary Transmitter for Car Bus Truck
【Easy & Convenience】We have made transmitter and receiver working together and test it before ship it,when you get it don't need to do anything ,just install it. we send Momentary mode default ( that is, Press the button is ON .Release your finger on the button is OFF ).
【SIGNAL】 ：This RF remote control adopts RF technology, with long remote control distance and stable signal. Signal of the wireless RF switch can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, Max range is up to 164ft / 50m with no obstacle.
【Excellent Advantage】：mini size ; flexible operation ; high sensitivity ; low power consumption ; Wireless control (eliminate the trouble of messy wiring and time consuming work : Save yourself time and money by using a wireless remote to switch on your load from a distance) ; easy to use,The receiver input DC6V-DC36V, Suitable for any DC6V 7.4V 9V 12V 13V 16V 18V 24V 28V 36V device
【Widely used】： wide range of applications from simple domestic remote control to autonomous control such as battery power switch, remote controller, wireless controller, DIY, Car, Truck, Motorcycle, Storage battery, relay, circuit board, Suitable for any DC 6V 7.4V 9V 12V 13V 16V 18V 24V 28V 36V device & More.
【Resist Interference】：It adopts non-directional wireless encoding technology, allowing independent control without mutual interference. Learning Dot on the receiver to matching the transmitter, the low voltage relay is inward, the Super-heterodyne receiver module receiving sensitivity is high ,anti-interference performance is good
Ximimark 2Sets 433MHz Ask Wireless Remote Control Transmitter and Receiver Module Kit STX882+SRX882 with Copper Spring Antenna
STX888 is a low-cost, high-power, low-harmonic ASK transmitter module made of high-performance wireless transmitter chip T01. With high stability and high cost performance, it can pass ROHS, FCC, R&TTE, ETSI, CE and other certifications. The data port of the module can be directly connected to the single-chip microcomputer, making the development and production of wireless products more convenient and faster.
The SRX882 is a micropower-powered superheterodyne receiver module for the STX882/STX888. It has high stability, anti-interference and high cost performance. It also has super driving force and can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to the microcontroller, making the development and production of wireless products more versatile.
Suitable for remote control door, wireless security alarm, wireless industrial control, wireless data transmission.
Small volume, low self-radiation.
High power long distance, frequency stability.(Band:433 (MHz),Transmit power:10~17(W))
Solidremote 12V - 24V Secure Wireless RF Remote Control Relay Switch Universal 2-Channel 433MHz Receiver with 2 FCC ID Transmitters for Garage Door Openers, LED Lights etc (KIT-1)
SECURE # Rolling code key fob device offers better security and far more code combinations (more than 18 quintillion - 18 x 10^18 possibilities, nearly a trillion more than typical fixed code or so-called learning code ones) and built on new platform using higher RF sensitivity -113dBm superheterodyne module for better long range and more stable performance.
EASY & FLEXIBLE # Two independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as one channel for garage door controller unit, the other for entry lights. Easy programming & easy to use DIP switches working mode selection between pulse / momentary, hold / toggle and latching mode.
ENCLOSURE # Designed to work both indoor and outdoor, default enclosure supplied protects the inner radio receiver circuit board safe from rain or other tough weather, while customer can also use chemical glue or epoxy adhesive to seal the wiring holes after setup, providing IP55 equivalent waterproof protection level. Mounting holes are provided for easy installation to walls etc using screws.
INTERFACE # 3-Level efficient switching power supply system. Our 202U receiver board accepts 12 volts - 24 volts AC or DC wide supply voltage range (min. current rating is [email protected] DC). Each relay can switch up to 10A @14V DC or 10A @125V AC for resistive load (6A @14VDC for inductive load). Built-in small DC motor / solenoid polarity reversing control capability by using interlock latching mode and both relays.
APPLICATIONS # Used in anti-theft alarm control panels, home automation systems, short and long range turn devices on / off wirelessly, lifts, boats, marine, winches, motor-driven curtain, roller blinds, overhead garage door & gate barriers, motorcycles, vehicles, cars, truck, industrial and agricultural electrical control such as water pumps & sprayer, electric door release locks, windows, manual switches extender, LED lighting lamp bulbs and strips, entrance and access control etc.